Tuesday, March 7, 2023

64bit Voron USB setup

 Use Pi Imager to install Klipper 64bit (with login/wifi)

if wifi doesn't work enable by updateding wpa_supplicant

install kiauh

use kiauh 

             install octoprint

                    restore backup

                    uninstall filament sensor, then install

                    klipper config directory:

            uninstall klipper

            install klipper

                   https://www.klipper3d.org/Installation.html

            update all

mount SD card

mount /dev/mmcblk0p1 /media/pi/boot

mount /dev/mmcblk0p2 /media/pi/root


make pi sudoer

/etc/sudoers.d/010_pi-nopasswd


apt-get install samba

 smbpasswd -a pi


enable SPI


sometimes mainsail conflicts with octoprint.

systemctl disable moonraker.service
or 
systemctl disable octoprint.service



No comments:

Post a Comment